- 1. The three-way handshake consists of the following except:
A) RAT
B) SYN-ACK
C) ACK
D) SYN
- 2. Well-known applications that use TCP/IP data encapsulation, use port numbers 0 to:
A) 49153
B) 255
C) 1023
D) 2047
- 3. Port numbers on TCP header segments are extremely important because they enable a receiving host to forward data to the correct
A) IP address
B) user
C) application
D) domain
- 4. The OSI model transport layer is responsible for regulating the flow of information from source to:
A) router
B) gateway
C) domain
D) destination
- 5. Hosts that send data will continue sending data until that data is:
A) acknowledged
B) multiplexed
C) synchronized
D) segmented
- 6. In TCP data transfer, Flow Control is efficient because it prevents the receiver from being overwhelmed by incoming:
A) data
B) ports
C) acks
D) syncs
- 7. Layer 4 addressing identifies the communicating:
A) applications
B) users
C) domains
D) ports
- 8. Layer 4 addressing identifies multiple conversations between the:
A) applications
B) hosts
C) ports
D) domains
- 9. In Wireshark, if a user sees "SYN," "SYN, ACK," and "ACK," that user is actually seeing a SESSION being:
A) postponed
B) retransmitted
C) established
D) transferred
- 10. The "NETSTAT" command allows us to see a local host web session with a remote:
A) server
B) gateway
C) user
D) domain
- 11. When forwarding data, the source hosts dynamically selects the source:
A) gateway
B) connection
C) address
D) port
- 12. To provide flow control as segments travel from source to destination, TCP uses window:
A) sequencing
B) acknowledgments
C) establishment
D) sizing
- 13. The best protocol used to provide low overhead and applications that do NOT require reliable data delivery would be:
A) UDP
B) POP3
C) TCP
D) IP
- 14. TCP and UDP header information BOTH include:
A) source and destination ports
B) sequencing
C) flow control
D) acknowledgements
- 15. TCP uses the following 3 features to accurately track data transmission except:
A) session establishment
B) gateway correction services
C) flow control
D) numbering and sequencing
- 16. Remote hosts that receive packets out of order reorder and do what else with those packets?
A) reconfigure
B) reassemble
C) readdress
D) retransmit
- 17. UDP is a protocol which provides minimal delays in data:
A) configuration
B) delivery
C) management
D) sequencing
- 18. The destination port for HTTP services on remote Web servers is usually port:
A) 80
B) 25
C) 23
D) 53
- 19. During the 3-way handshake, TCP begins initializing the sessions' sequence:
A) numbers
B) users
C) domains
D) connection
- 20. Hosts that do not receive an ACK from the receiving server will continue doing what with the already sent data?
A) re-sequence it
B) reconfigure it
C) reconnect it
D) retransmit it
- 21. Whereas the average size of a UDP Datagram segment is 8 Bytes, a TCP segment is how many bytes?
A) 23
B) 20
C) 80
D) 25
- 22. The Port Number Range for Registered Ports is from 1024 to:
A) 0
B) 49151
C) 65535
D) 49152
- 23. The Port Number Range for "Private and/or Dynamic Ports" is from 49152 to:
A) 0
B) 443
C) 1024
D) 65535
- 24. The Well-Known TCP port for FTP is port:
A) 80
B) 25
C) 21
D) 23
- 25. The Well -Known TCP port for Telnet is port:
A) 23
B) 25
C) 80
D) 21
- 26. The Well-Known TCP port for Secure HTTP (HTTPS) is port:
A) 23
B) 443
C) 25
D) 21
- 27. The Well-Known UDP port for TFTP (Trivial FTP) crucial for cisco file transfer is port:
A) 69
B) 21
C) 443
D) 23
- 28. Which is the best Web site (180+ pages) suited to obtain more information about Port assignments?
A) port.org
B) portnumber4me.com
C) superport.net
D) iana.org
- 29. If Host A is sending a TCP message with the packets #43, 44, 45, 46, and all was well received, the ACK should have what number returning to the host?
A) FIN
B) 49
C) 47
D) 46
- 30. Window Sizing, 'sliding windows,' or Windowing, occurs when Flow Control detects too much congestion with the:
A) domain
B) router
C) receiver
D) gateway
|