A) To organize cables inside the case B) To clean dust from components C) To identify and troubleshoot system problems D) To install screws in the system unit
A) To avoid testing the computer B) To make the repair take longer C) To replace several components at once D) To pinpoint the problem and avoid unnecessary replacement
A) Remove the operating system. B) Replace the power supply without testing. C) Check whether the RAM is installed correctly. D) Replace the motherboard immediately.
A) The operating system needs reinstalling. B) The RAM has too much storage capacity. C) Heat transfer from the CPU is reduced. D) The network card is disconnected.
A) Replace several components until the computer works. B) Diagnose the problem, confirm the affected component, then perform the appropriate repair safely. C) Reinstall all software before checking the hardware. D) Ignore the symptoms if the computer still turns on.
A) Technician B works quickly and ignores static electricity. B) Technician D uses ESD protection and handles the components carefully. C) Technician A handles components while standing on an ungrounded surface without ESD protection. D) Technician C places components anywhere on the worktable.
A) Observe safety ? reapply thermal paste immediately ? retest ? inspect the fan only if shutdown continues B) Observe safety ? replace the fan immediately ? retest ? inspect thermal paste only if shutdown continues C) Observe safety ? inspect the fan, heat sink, and thermal paste ? correct the identified cooling fault ? retest D) Observe safety ? inspect the fan, heat sink, and thermal paste ? correct the identified cooling fault ? retest
A) They help keep cables neatly organized. B) They test electrical circuits. C) They prevent all hardware failures. D) They remove software errors.
A) Shut down the computer and prepare a safe work area before handling internal parts. B) Leave the computer running so the fans keep moving air. C) Remove components first and check safety precautions afterward. D) Spray cleaning liquid directly on the motherboard before opening the case.
A) Clean the dust carefully with suitable cleaning tools, then verify the fan operates properly. B) Install additional software before cleaning the hardware. C) Ignore the dust because the fan is still spinning. D) Replace the fan immediately without checking its condition.
A) Check the computer for errors and proper operation. B) Disconnect all storage devices permanently. C) Check the computer for errors and proper operation. D) Remove all installed applications.
A) System tested B) Components handled without ESD protection C) Software updated D) Hardware cleaned
A) Replace components regularly even when no problem is found. B) Clean the hardware, update software, check for errors, and observe safety precautions. C) Clean the case only when it becomes visibly dirty. D) Update software but ignore hardware condition.
A) Prepare a safe workspace ? clean hardware ? update software ? skip error checking ? verify operation B) Prepare a safe workspace ? check errors ? clean only the case exterior ? update software ? verify operation C) Prepare a safe workspace ? inspect/clean hardware ? update needed software ? check errors ? verify operation D) Prepare a safe workspace ? update software ? replace working hardware ? check errors ? verify operation
A) To prevent the computer from using storage devices B) To increase the physical size of the computer C) To help keep software current and functioning properly D) To replace the need for hardware cleaning
A) To verify whether the system is functioning properly and identify remaining problems B) To make the computer consume more power C) To increase the number of installed components D) To avoid testing the completed work
A) Ignore the dust and update only one application. B) Clean the hardware safely, update the software, and check the system for errors. C) Clean the hardware safely, update the software, and check the system for errors. D) Remove all applications and leave the hardware untouched.
A) The error can be ignored because maintenance is complete. B) The system is fully repaired because the hardware is clean. C) All hardware should be replaced immediately. D) The remaining error still needs to be identified and diagnosed.
A) Poor practice, because routine cleaning should address buildup before it contributes to problems. B) Appropriate, because dust does not affect system performance. C) Poor practice only if the computer also has outdated software. D) Appropriate, because maintenance is needed only after failure.
A) Date ? observed condition ? maintenance task ? computer brand ? room location B) Date ? hardware list ? software names ? purchase date ? user name C) Date ? observed condition ? maintenance task ? safety measure ? result/follow-up D) Date ? technician name ? computer model ? keyboard type ? monitor size.
A) 2 GB B) 1 GB C) 8 GB D) 4 GB
A) 8 GB B) 2 GB C) 4 GB D) 1 GB
A) 64 GB B) 20 GB C) 16 GB D) 32 GB
A) 20 GB B) 32 GB C) 16 GB D) 64 GB
A) 3 GHz processor B) 500 MHz processor C) 1 GHz or faster processor or SoC D) 2 GHz dual-core processor
A) DirectX 7 with WDDM 2.0 B) OpenGL 4.0 only C) DirectX 9 or later with WDDM 1.0 driver D) DirectX 10 only
A) Printer cable B) Network cable C) Installation media such as a bootable flash drive or optical media D) Audio CD only
A) DEL or F2 B) ESC or F12 C) F1 or F3 D) F5 or F6
A) F12 B) F2 C) F10 D) F8
A) Modern B) Secure C) Legacy D) UEFI
A) Back B) Cancel C) Finish D) Next
A) Restart B) Repair C) Install now D) Update
A) Use trial mode B) Activate later C) I don't have a product key D) Skip license
A) The edition activated by the product key B) The computer brand C) The monitor resolution D) The keyboard layout
A) I decline the license terms B) Offline installation C) Custom license D) I accept the license terms
A) Repair your computer B) Custom: Install Windows only (Advanced) C) Upgrade: Install Windows D) Express Install
A) Drive 0 Unallocated Space B) Recovery Drive C) System Reserved only D) Optical Drive
A) Keyboard layout B) Boot mode C) Hard drive partition D) Product key
A) Cancel B) Skip C) Remove D) Back
A) Set up for personal use B) Set up for repair C) Set up for organization D) Set up for testing
A) Microsoft account information B) Printer account C) Router account D) BIOS password only
A) OneDrive B) Timeline C) Task View D) Cortana
A) The printer brand B) The screen brightness C) The target system's hardware requirements D) The desktop wallpaper
A) Applications never use operating systems B) It removes the need for updates C) It changes the monitor resolution D) Programs are generally operating-system dependent
A) Software requirements and required updates or utilities B) Speaker volume C) Keyboard color D) Mouse size
A) Reboot the machine before launching the software B) Immediately uninstall it C) Delete the operating system D) Disconnect the keyboard
A) Desktop theme B) User wallpaper C) Minimum system requirements D) Screen saver
A) Keyboard layout only B) Compatibility with the operating system version C) Monitor brand D) Printer ink level
A) Whether the monitor has speakers B) Whether customers can successfully install and set up the software C) Whether the desktop wallpaper loads D) Whether the keyboard is wireless
A) Keyboard test B) Stress test C) Color test D) Login test
A) The computer's boot animation B) The user's wallpaper and desktop theme C) The hardware specification, brand name, and device code D) The monitor's brightness setting
A) The computer needs a new BIOS password B) The required scanner driver may not be installed C) The hard drive must be converted to GPT D) The computer must perform a warm boot
A) An All-in-One DriverPack application B) A monitor calibration tool C) A boot menu shortcut D) A BIOS setup password
A) Selecting the wrong disk can result in permanent deletion of data B) Selecting the wrong disk changes the CPU speed C) The wrong disk will increase RAM capacity D) The wrong disk will automatically install Windows
A) Partitions or volume formatting on the selected disk may be removed, causing data loss B) The keyboard will become wireless C) The BIOS will automatically update D) The monitor will stop displaying colors
A) `create partition primary` B) `create disk bootable` C) `new partition system` D) `make partition active`
A) `active` B) `boot` C) `enable disk` D) `start`
A) FAT32 is specified in the procedure for UEFI-supported platforms B) FAT32 increases the computer's RAM C) FAT32 automatically installs device drivers D) FAT32 replaces the BIOS chip
A) Copy the operating system files to the prepared USB flash drive B) Delete the USB partition C) Remove the active status D) Change the BIOS password
A) Replace the keyboard B) Change the monitor's fan settings C) Check and configure the BIOS/UEFI boot order so the USB device can be selected as the boot device D) Install a printer driver |