- 1. 1. --------- is the process of transferring a design or pattern to a workpiece, as a first step in the manufacturing process.
A) Surface plate
B) Marking out
C) Wood work
D) Metal work
- 2. 2. Another name for 'height gauge' is ---------
A) Height meter
B) Scribing block
C) Height level
D) Scripture blade
- 3. 3. The material in metalwork used to mark lines on the workpiece before machining is called --------
A) Scriber
B) Ball pein hammer
C) Plating
D) Angular
- 4. 4. One of the following is not a marking out tool.
A) Punch
B) Surface gauge
C) Steel rule
D) Protractor
- 5. 5. --------- is used to make holes in materials.
A) Punch
B) Scriber
C) Divider
D) Calipers
- 6. 6. An equilateral triangle has -----
A) Two equal angles
B) Three equal sides
C) No equal sides
D) Two equal sides
- 7. 7. How many sides has a heptagon?
A) 10
B) 7
C) 6
D) 8
- 8. 8. All of the following are examples of equilaterals except a -------------
A) Rectangle
B) Square
C) Triangle
D) Parallelogram
- 9. 9. One of the following is a dye used in metalwork to aid marking out rough parts for further machining.
A) Iodine
B) Layout stain
C) Gental violet
D) Gemsa stain
- 10. 10. --------- is a triangle that has two of its angles equal, usually the base angles .
A) Right angle
B) scalene
C) Equilateral
D) Isosceles
- 11. 11. ----------- is a triangle that has one of the angles as 90°
A) A righ-angled triangle
B) An obtuse angle
C) Acute angle
D) A right angle
- 12. 12. -----------is used to measure the outside diameter of metal in increments of one thousandth of an inch.
A) Screw driver
B) Divider
C) Dial caliper
D) Micrometer
- 13. 13. One of the following is not a measuring tool.
A) Inside caliper
B) Divider
C) Compass
D) Odd-leg caliper
- 14. 14. The following are driving tools except -------
A) Ball -peen
B) Hammer
C) Hardness tester
D) Tinman's mallet
- 15. 15. ------ is used to test for the accuracy of the work.
A) Metric rule
B) Bossing mallet
C) Pliers
D) Try square
- 16. 16. One of the following is used to shape metals.
A) Hammer
B) Punch
C) Tinman's mallet
D) Ball peen
- 17. 17. -------is an instrument designed to drive in and out screws.
A) Wrenches
B) Tinman's mallet
C) Calipers
D) Screwdriver
- 18. 18. The instrument used in measuring the diameter or the inner part of an object is called ----------
A) Insider caliper
B) Inside capler
C) Inside diameter
D) Inside measurer
- 19. 19. One of the following is not a type of screwdriver.
A) Drill bradawl screwdriver
B) Allen screwdriver
C) Offset screwdriver
D) Star screwdriver
- 20. 20. All are examples of pliers except ----------
A) Cutting plier
B) Bench hook plier
C) Gripping plier
D) Long nose plier
|