A) ISO 26262 B) IEC 62279 C) IEC 62061 D) IEC 61511
A) Motor Industry Software Reliability Association B) Motorized Integrated System Reliability Association C) Mobile Instrumentation Software Reliability Association D) Manufacturing Industry Safety Reliability Association
A) December 1998 B) January 1990 C) November 2000 D) November 1994
A) Railway signaling protocols B) Nuclear power plant instrumentation C) Guidelines on using C and C++ languages D) Manufacturing process automation
A) IEC 62061 B) IEC 62279 C) IEC 61513 D) IEC 61511
A) EN 50262 and EN 50279 B) EN 50128 and EN 50657 C) EN 61508 and EN 61511 D) EN 62061 and EN 61513
A) IEC 62279 B) ISO 26262 C) IEC 61511 D) IEC 62061
A) ISO 26262 B) IEC 61511 C) IEC 62061 D) IEC 61513
A) IEC 61511 B) IEC 62061 C) IEC 62279 D) IEC 61513
A) CENELEC B) IEC C) ISO D) MISRA
A) A voluntary recommendation for hardware design B) An outdated set of guidelines C) The de facto standard for embedded C programming D) The primary language for railway signaling
A) Petrochemical B) Railway signaling C) Machinery assembly D) Automotive manufacturing
A) Nuclear reactor cooling systems B) Automotive engine control units C) Railway track switching systems D) Machinery safety-related electrical control systems
A) System integrity level B) System improvement level C) Safety integrity level D) Safety implementation level
A) Three B) Five C) Two D) Four
A) A measure of software speed B) A measure of hardware cost C) A measure of physical durability D) A measure of design quality
A) The total sum of all device SC ratings B) The smallest SC rating of the devices used C) The average SC rating of all devices D) The highest SC rating of the devices used
A) Twice per decade B) Once per year C) More than once per year D) Less than once per year
A) More than once per year B) Less than or equal to once per year C) More than twice per year D) Exactly ten times per year
A) Allowable probability of demand failure B) Allowable response latency C) Allowable number of user interactions D) Allowable frequency of dangerous failure
A) To attest that a product meets certification requirements B) To manufacture safety-certified products C) To act as the national government regulator D) To write the original IEC 61508 standard
A) International Patent Law B) The IEC central office stamp C) Direct government mandates D) Multilateral Recognition Arrangement (MLA)
A) Compliance manual B) Safety charter C) Auditor guide D) Certification scheme
A) ILAC B) TÜV Rheinland C) ISO D) IAF
A) 7 B) 3 C) 16 D) 10
A) Part 4 B) Parts 5–7 C) Parts 1–3 D) Parts 14–16
A) 16 B) 3 C) 5 D) 7
A) Phases 1–16 B) Phases 14–16 C) Phases 1–5 D) Phases 6–13
A) Zero risk is the primary objective of the standard B) Zero risk is only required for high-hazard industries C) Zero risk is achievable through perfect design D) Zero risk can never be reached
A) Risks are only evaluated at the design phase B) Risk reduction is optional for small systems C) All risks must be eliminated regardless of cost D) Non-tolerable risks must be reduced
A) Tolerable if cost of reduction exceeds improvement B) Unacceptable in any circumstance C) Undesirable but potentially tolerable D) Acceptable as it stands
A) Programmable electronics B) Operational maintenance procedures C) General definitions D) Mechanical devices
A) 1998 B) 2010 C) 2000 D) 2005
A) Phases 1–5 B) Phases 6–13 C) Phases 1–7 D) Phases 14–16
A) Part 1 B) Part 4 C) Part 7 D) Part 3
A) Object coverage B) Statement coverage C) Line coverage D) MC/DC
A) A network analyzer B) A word processor C) A Unit Testing tool D) A compiler only
A) Mining B) Aerospace C) Automotive D) Household appliances
A) W. Goble B) M.J.M. Houtermans C) D. Smith D) C. O'Brien
A) 430 pages B) 150 pages C) 458 pages D) 40 pages |