A) Carving with bare hands. B) Using the sharpest knife possible. C) Always cut away from yourself. D) Working in a dimly lit area.
A) Basswood B) Rosewood C) Oak D) Maple
A) The color of the wood. B) The weight of the wood. C) The direction of the wood fibers. D) The smell of the wood.
A) Detail knife B) V-tool C) Skew chisel D) Gouge
A) To sharpen the knife. B) To prevent the wood from splitting beyond the desired cut. C) To stain the wood. D) To glue pieces together.
A) Vinegar B) Motor oil C) Wax D) Bleach
A) Hammer grip B) Overhand grip C) Palm grip D) Thumb push grip
A) Straightening the edge. B) Rusting the edge. C) Removing metal to sharpen the edge. D) Dulling the edge.
A) To hold the wood in place. B) To provide additional force to a chisel or gouge. C) To smooth the wood surface. D) To measure the wood.
A) Burning patterns into wood. B) Painting chips of wood. C) Removing small chips of wood to create a pattern. D) Carving large pieces of wood.
A) Knife B) Chisel C) Gouge D) Welding torch
A) Using sandpaper B) Using a blunt rock C) Using a strop and honing compound D) Using a hammer and nail
A) To hang your tools on B) To clamp large pieces of wood C) To provide a stable and safe surface for carving small pieces D) To measure the wood
A) Ear plugs B) Steel toed boots C) Welding mask D) Thumb guards, cut resistant gloves and eye protection
A) Iron carving B) Sand carving C) Relief carving D) Plastic carving
A) The color of the wood B) The length of the wood C) The weight of the wood D) The width of the cut made by a saw or knife
A) To glue pieces together B) To cut straight lines C) To drill holes D) To shape and smooth curved surfaces
A) Farming crops B) Mining for minerals C) Creating decorative objects D) Building bridges
A) To prevent rust B) To dull the blade C) To add color to the blade D) To sharpen the blade
A) Buried in the ground B) Thrown haphazardly into a drawer C) In a bucket of water D) Separately and protected to avoid damage
A) Painting wood with watercolors. B) Carving small pieces of wood with a knife. C) Carving large pieces of wood with a chainsaw. D) Burning designs into wood.
A) Pine B) Balsa C) Cedar D) Cherry
A) Cutting wood into small pieces. B) Polishing wood to a high shine. C) Gluing wood together. D) Shaping wood to a rough form, prior to sanding.
A) 45 degrees B) 15-20 degrees C) Parallel to the sharpening stone D) 90 degrees
A) Drilling holes. B) Attaching pieces of wood together. C) Creating clean edges and corners. D) Roughing out large areas of wood.
A) Tight knot B) Pin knot C) Loose knot D) Burl
A) The sharpest part of the blade. B) The decorative markings on the blade. C) The part of the blade that extends into the handle. D) The wooden handle itself.
A) Soaking the wood in water. B) Painting the wood a particular color. C) Adding spices to the wood to improve its smell. D) Drying the wood to reduce moisture content.
A) Crosscut saw B) Rip saw C) Coping saw D) Hand saw
A) To see the details clearly and prevent mistakes. B) To attract insects. C) To keep the wood warm. D) To make the wood smell better. |