Electrical engineering
  • 1. Electrical engineering is a field of engineering that deals with the study and application of electricity, electronics, and electromagnetism. It involves designing, developing, testing, and supervising the manufacturing of electrical equipment, systems, and components. Electrical engineers work on a wide range of technologies, from power generation and distribution to communication systems, signal processing, and control systems. They apply principles of physics and mathematics to solve complex problems and create innovative solutions. Electrical engineering plays a crucial role in shaping modern society by enabling advancements in areas such as renewable energy, smart grids, electric transportation, and electronic devices.

    What is the SI unit of electrical resistance?
A) Volt
B) Ampere
C) Watt
D) Ohm
  • 2. What does AC stand for in the context of electrical engineering?
A) Analog Circuit
B) Alternating Current
C) Ampere Control
D) Active Current
  • 3. What does DC stand for in the context of electrical engineering?
A) Dynamic Control
B) Digital Circuit
C) Direct Current
D) Decibel Calibrator
  • 4. Which component stores electrical charge in a circuit?
A) Resistor
B) Diode
C) Capacitor
D) Transistor
  • 5. What is the unit of electric current?
A) Ampere
B) Volt
C) Watt
D) Ohm
  • 6. What is the relationship between voltage, current, and resistance in a circuit?
A) Faraday's Law
B) Newton's Law
C) Coulomb's Law
D) Ohm's Law
  • 7. What type of material is used as a semiconductor in electronic devices?
A) Silicon
B) Copper
C) Gold
D) Aluminum
  • 8. Which device converts mechanical energy into electrical energy?
A) Motor
B) Transformer
C) Inverter
D) Generator
  • 9. Which law states that the total electric flux through a closed surface is equal to the net charge enclosed by the surface?
A) Gauss's Law
B) Newton's Law of Cooling
C) Ampere's Law
D) Faraday's Law
  • 10. In a three-phase AC system, how many degrees are there between each phase?
A) 60
B) 120
C) 90
D) 180
  • 11. Which component is used to protect electrical circuits from overcurrent?
A) Fuse
B) Resistor
C) Inductor
D) Diode
  • 12. What is the unit of electric power?
A) Ampere
B) Volt
C) Watt
D) Ohm
  • 13. Which law states that the induced electromotive force in any closed circuit is equal to the rate of change of magnetic flux through the circuit?
A) Hooke's Law
B) Ohm's Law
C) Faraday's Law
D) Planck's Law
  • 14. What type of circuit allows only one path for current flow?
A) Parallel
B) Combination
C) Series
D) Complex
  • 15. Which device is used to step up or step down voltage in an electrical circuit?
A) Inductor
B) Transformer
C) Diode
D) Capacitor
  • 16. In a circuit, which component opposes the change in current flow?
A) Resistor
B) Fuse
C) Inductor
D) Transistor
  • 17. What is the lowest layer in the OSI model that deals with electrical signals?
A) Application Layer
B) Physical Layer
C) Network Layer
D) Data Link Layer
  • 18. Which law states that the heat produced in a conductor is proportional to the square of the current flowing through it?
A) Ohm's Law
B) Boyle's Law
C) Joule's Law
D) Kirchhoff's Law
  • 19. What does the term 'grounding' refer to in electrical systems?
A) Creating a short circuit
B) Generating electricity
C) Increasing current flow
D) Connecting a conductor to the Earth for safety and functionality
  • 20. What is the term for the opposition to the flow of alternating current in a circuit?
A) Impedance
B) Resistance
C) Reactance
D) Conductance
  • 21. Which material is commonly used as a good conductor in electrical wires?
A) Silver
B) Aluminum
C) Plastic
D) Copper
  • 22. In a series circuit, how does the current compare at different components?
A) The same.
B) Is dependent on resistor values.
C) Doubles at each component.
D) Halves at each component.
  • 23. Which device is used to measure the flow of electric current in a circuit?
A) Multimeter
B) Voltmeter
C) Ammeter
D) Ohmmeter
  • 24. Which component can store binary data in a computer?
A) Memory
B) Capacitor
C) Resistor
D) Op-Amp
  • 25. What is the process of converting analog signals into digital signals?
A) Digital-to-Analog Conversion
B) Analog-to-Digital Conversion
C) Signal Amplification
D) Frequency Modulation
  • 26. What is the primary function of a transistor?
A) Storage
B) Conduction
C) Amplification
D) Resistance
  • 27. What is the term for a material that does not allow the flow of electric current?
A) Semiconductor
B) Insulator
C) Resistor
D) Conductor
  • 28. What is a tool used to test if a circuit is open or closed?
A) Multimeter
B) Oscilloscope
C) Function Generator
D) Logic Analyzer
  • 29. What is the purpose of a capacitor in an electronic circuit?
A) Generate heat
B) Control current flow
C) Store and release electrical energy
D) Amplify signals
  • 30. What is the purpose of a rectifier in a power supply circuit?
A) Step up voltage
B) Convert AC to DC
C) Filter noise
D) Regulate current
  • 31. What component is used to convert AC to DC?
A) Inductor
B) Capacitor
C) Rectifier
D) Transformer
  • 32. What is the unit of frequency?
A) Ampere
B) Watt
C) Hertz
D) Volt
  • 33. Which electrical quantity is measured in coulombs?
A) Current
B) Resistance
C) Voltage
D) Charge
  • 34. What component is used to amplify or switch electronic signals in electronic circuits?
A) Resistor
B) Inductor
C) Transistor
D) Capacitor
  • 35. What is the SI unit of electrical potential difference?
A) Ohm
B) Watt
C) Volt
D) Ampere
  • 36. Which type of circuit has multiple paths for current to flow?
A) Parallel Circuit
B) Series Circuit
C) Complex Circuit
D) Combination Circuit
  • 37. What is the function of a transistor in electronic circuits?
A) Generate heat
B) Regulate voltage
C) Store charge
D) Amplify or switch electronic signals
  • 38. What is the unit of electric charge?
A) Ohm
B) Watt
C) Coulomb
D) Volt
  • 39. Which type of motor has a rotor that follows a rotating magnetic field produced by the stator?
A) Induction Motor
B) Synchronous Motor
C) DC Motor
D) Stepper Motor
  • 40. What does RF stand for in electronics?
A) Resistor Fuse
B) Radio Frequency
C) Rectified Frequency
D) Regulated Frequency
  • 41. What is the process of converting sound waves into electrical signals?
A) Rectification
B) Transduction
C) Modulation
D) Vibration
  • 42. Which type of battery is commonly used in portable electronic devices?
A) Lithium-ion
B) Nickel-cadmium
C) Alkaline
D) Lead-acid
  • 43. Which law states that the sum of currents entering a node is equal to the sum of currents leaving the node?
A) Ohm's Law
B) Kirchhoff's Current Law
C) Ampere's Law
D) Gauss's Law
  • 44. What type of signal carries information through optical fibers in communication systems?
A) Sound
B) Electricity
C) Heat
D) Light
  • 45. Which of the following is a passive component?
A) Darlington Pair
B) Resistor
C) Transistor
D) Operational Amplifier
  • 46. What does PWM stand for?
A) Pulse Wave Modulation
B) Phase Width Monitoring
C) Pulse Width Modulation
D) Power Wave Multiplexer
Created with That Quiz — where test making and test taking are made easy for math and other subject areas.