CCNA Semester 1 - Chapter 9 Review
- 1. Ethernet operates at two layers of the OSI model, the Data-Link Layer and the _____________ Layer.
A) network
B) physical
C) application
D) transport
- 2. "Interframe spacing" refers to the minimum interval, measured in bit-times, that any station must wait before sending another _____________.
A) frame
B) radio wave
C) interrupt signal
D) wireless wave
- 3. "Interframe spacing" also refers to the the time allowed for slow stations to process a frame and prepare for the next _______________.
A) frame
B) interrupt signal
C) wireless wave
D) radio wave
- 4. The 3 primary functions of DATA-LINK Layer encapsulation are: addressing, frame delimiting, and error _________________.
A) limitation
B) detection
C) correction
D) fragmentation
- 5. In a CSMA/CD network, if collisions occur, the hosts return to a listen-before-transmit ____________.
A) network
B) server
C) mode
D) switch
- 6. The Upper Data Link Sublayer has 3 primary roles: insulates the network layer protocols from changes in the physical equipment, makes the connection with the upper layers, and identifies the network layer ________________.
A) port
B) address
C) protocol
D) application
- 7. The LLC sublayer in Ethernet standards is represented by the _______________ 802.2 standard.
A) ISO
B) IEEE
C) IMG
D) Microsoft
- 8. Why would hosts on an Ethernet LAN experiencing a collision delay before sending another frame?
A) to avoid another collision
B) they can't help it, cheap devices
C) the tables aren't updated
D) to speed up the network
- 9. In an ETHERNET frame, there are three main parts: header, data, and trailer. The Data FIELD is really the encapsulated ______________ layer packet.
A) presentation
B) session
C) application
D) network
- 10. In a CSMA/CD LAN, increased collisions can decrease network _________________________.
A) collisions
B) expansion
C) performance
D) domains
- 11. Ethernet operates at which layer of the TCP/IP Network Model?
A) transport
B) Internet
C) network access
D) application
- 12. The primary responsibility of the ARP is to resolve IPv4 addresses to _______________ addresses.
A) MAC
B) house
C) street
D) super
- 13. MAC addresses are copied into RAM during system startup, they contain a 3-byte OUI, and they are ________ bytes long.
A) 6
B) 6000
C) 600000
D) 600
- 14. In Ethernet-based networks, Switches are preferred because they increase the throughput of data transfers, and ___________________ collisions.
A) stop
B) maximize
C) duplicate
D) minimize
- 15. In Ethernet networks the 2 most common media types are FIBER and copper-based __________.
A) radicalized signaling
B) STP
C) wireless
D) UTP
|
Students who took this test also took :