- 1. 1. --------- is the process of transferring a design or pattern to a workpiece, as a first step in the manufacturing process.
A) Marking out
B) Wood work
C) Metal work
D) Surface plate
- 2. 2. Another name for 'height gauge' is ---------
A) Scribing block
B) Scripture blade
C) Height level
D) Height meter
- 3. 3. The material in metalwork used to mark lines on the workpiece before machining is called --------
A) Ball pein hammer
B) Angular
C) Scriber
D) Plating
- 4. 4. One of the following is not a marking out tool.
A) Punch
B) Steel rule
C) Protractor
D) Surface gauge
- 5. 5. --------- is used to make holes in materials.
A) Divider
B) Scriber
C) Calipers
D) Punch
- 6. 6. An equilateral triangle has -----
A) Three equal sides
B) Two equal sides
C) No equal sides
D) Two equal angles
- 7. 7. How many sides has a heptagon?
A) 7
B) 6
C) 10
D) 8
- 8. 8. All of the following are examples of equilaterals except a -------------
A) Square
B) Rectangle
C) Triangle
D) Parallelogram
- 9. 9. One of the following is a dye used in metalwork to aid marking out rough parts for further machining.
A) Gental violet
B) Layout stain
C) Gemsa stain
D) Iodine
- 10. 10. --------- is a triangle that has two of its angles equal, usually the base angles .
A) Isosceles
B) Right angle
C) scalene
D) Equilateral
- 11. 11. ----------- is a triangle that has one of the angles as 90°
A) An obtuse angle
B) A righ-angled triangle
C) A right angle
D) Acute angle
- 12. 12. -----------is used to measure the outside diameter of metal in increments of one thousandth of an inch.
A) Micrometer
B) Divider
C) Dial caliper
D) Screw driver
- 13. 13. One of the following is not a measuring tool.
A) Compass
B) Divider
C) Odd-leg caliper
D) Inside caliper
- 14. 14. The following are driving tools except -------
A) Hardness tester
B) Tinman's mallet
C) Hammer
D) Ball -peen
- 15. 15. ------ is used to test for the accuracy of the work.
A) Metric rule
B) Try square
C) Pliers
D) Bossing mallet
- 16. 16. One of the following is used to shape metals.
A) Hammer
B) Tinman's mallet
C) Ball peen
D) Punch
- 17. 17. -------is an instrument designed to drive in and out screws.
A) Wrenches
B) Calipers
C) Tinman's mallet
D) Screwdriver
- 18. 18. The instrument used in measuring the diameter or the inner part of an object is called ----------
A) Insider caliper
B) Inside capler
C) Inside measurer
D) Inside diameter
- 19. 19. One of the following is not a type of screwdriver.
A) Drill bradawl screwdriver
B) Star screwdriver
C) Offset screwdriver
D) Allen screwdriver
- 20. 20. All are examples of pliers except ----------
A) Long nose plier
B) Cutting plier
C) Gripping plier
D) Bench hook plier
|