A) IEC 62279 B) ISO 26262 C) IEC 61511 D) IEC 62061
A) Manufacturing Industry Safety Reliability Association B) Motor Industry Software Reliability Association C) Mobile Instrumentation Software Reliability Association D) Motorized Integrated System Reliability Association
A) December 1998 B) January 1990 C) November 2000 D) November 1994
A) Manufacturing process automation B) Nuclear power plant instrumentation C) Railway signaling protocols D) Guidelines on using C and C++ languages
A) IEC 62061 B) IEC 62279 C) IEC 61513 D) IEC 61511
A) EN 50262 and EN 50279 B) EN 62061 and EN 61513 C) EN 50128 and EN 50657 D) EN 61508 and EN 61511
A) ISO 26262 B) IEC 62279 C) IEC 62061 D) IEC 61511
A) IEC 61513 B) IEC 61511 C) IEC 62061 D) ISO 26262
A) IEC 61513 B) IEC 62061 C) IEC 61511 D) IEC 62279
A) IEC B) MISRA C) ISO D) CENELEC
A) The de facto standard for embedded C programming B) A voluntary recommendation for hardware design C) An outdated set of guidelines D) The primary language for railway signaling
A) Railway signaling B) Petrochemical C) Machinery assembly D) Automotive manufacturing
A) Machinery safety-related electrical control systems B) Nuclear reactor cooling systems C) Automotive engine control units D) Railway track switching systems
A) Safety implementation level B) Safety integrity level C) System improvement level D) System integrity level
A) Four B) Three C) Five D) Two
A) A measure of hardware cost B) A measure of physical durability C) A measure of design quality D) A measure of software speed
A) The total sum of all device SC ratings B) The highest SC rating of the devices used C) The average SC rating of all devices D) The smallest SC rating of the devices used
A) Less than once per year B) More than once per year C) Twice per decade D) Once per year
A) More than once per year B) More than twice per year C) Exactly ten times per year D) Less than or equal to once per year
A) Allowable response latency B) Allowable probability of demand failure C) Allowable frequency of dangerous failure D) Allowable number of user interactions
A) To act as the national government regulator B) To attest that a product meets certification requirements C) To write the original IEC 61508 standard D) To manufacture safety-certified products
A) International Patent Law B) Direct government mandates C) Multilateral Recognition Arrangement (MLA) D) The IEC central office stamp
A) Safety charter B) Certification scheme C) Compliance manual D) Auditor guide
A) ILAC B) IAF C) ISO D) TÜV Rheinland
A) 10 B) 7 C) 16 D) 3
A) Parts 1–3 B) Parts 14–16 C) Part 4 D) Parts 5–7
A) 16 B) 5 C) 3 D) 7
A) Phases 14–16 B) Phases 6–13 C) Phases 1–5 D) Phases 1–16
A) Zero risk can never be reached B) Zero risk is achievable through perfect design C) Zero risk is the primary objective of the standard D) Zero risk is only required for high-hazard industries
A) Non-tolerable risks must be reduced B) Risks are only evaluated at the design phase C) All risks must be eliminated regardless of cost D) Risk reduction is optional for small systems
A) Unacceptable in any circumstance B) Undesirable but potentially tolerable C) Tolerable if cost of reduction exceeds improvement D) Acceptable as it stands
A) Programmable electronics B) Mechanical devices C) Operational maintenance procedures D) General definitions
A) 2005 B) 2000 C) 2010 D) 1998
A) Phases 1–7 B) Phases 6–13 C) Phases 1–5 D) Phases 14–16
A) Part 4 B) Part 7 C) Part 3 D) Part 1
A) Statement coverage B) Line coverage C) MC/DC D) Object coverage
A) A compiler only B) A network analyzer C) A Unit Testing tool D) A word processor
A) Mining B) Household appliances C) Automotive D) Aerospace
A) C. O'Brien B) W. Goble C) M.J.M. Houtermans D) D. Smith
A) 150 pages B) 458 pages C) 430 pages D) 40 pages |