A) Eight B) Two C) Six D) Four
A) Polyester B) Polystyrene C) Polyethylene D) Polyurethane
A) Conductive additive B) Lithium-transition-metal-oxide C) Poly(vinylidene fluoride) D) Polypropylene
A) Polyethylene B) Polyvinylidene fluoride C) Polypropylene D) Carbon
A) Physical phase of the electrolyte B) Number of electrodes C) Presence of a separator D) Use of conductive additives
A) Pure liquid B) Dry solid or gel-like C) Gaseous D) Metal-based
A) Solid and liquid B) Liquid and gaseous C) Conductive and non-conductive D) Dry solid and gel polymer
A) Presence of liquid electrolytes B) High volatility C) Lack of lithium salts D) Poor ion transfer due to physical phase
A) Solid metal B) Gelled electrolyte C) Polypropylene D) Polyethylene
A) Removing all liquid from the cell B) Adding solid metal powder C) Incorporating organic liquid in a polymer matrix D) Heating the cell to high temperatures
A) Higher thermal stability and low volatility B) Higher conductivity at room temperature C) Lower cost of production D) Increased mass of the battery
A) 3.6 V B) 4.2 V C) 2.7 V D) 5.0 V
A) 1.8 V B) 3.6 or 3.7 V C) 2.7 V D) 4.2 V
A) 4.0–4.2 V B) 1.8–2.0 V C) 3.6–3.7 V D) 2.7–3.0 V
A) 3.6–3.7 V B) 2.7–3.0 V C) 4.2 V D) 1.8–2.0 V
A) Electronic circuit B) Conductive additive C) Separator D) Polymer binder
A) To reduce internal resistance B) To increase the total voltage C) To allow for faster manufacturing D) To monitor and balance the state of charge
A) Polymer matrix B) Carbon negative electrode C) Separator film D) Conductive additive
A) Polypropylene B) Lithium-metal-oxide C) Carbon D) Poly(vinylidene fluoride)
A) LiPolymerX B) LiSol C) LiPo D) LiDry
A) Polyacrylonitrile (PAN) B) Ethylene carbonate C) Lithium hexafluorophosphate D) Diethyl carbonate
A) Faster liquid convection B) Improved safety features C) Lower manufacturing cost D) Increased liquid leakage
A) Stationary power plants B) Underground power grids C) Heavy industrial machinery D) Weight-critical devices
A) Michel Armand B) Nishi C) Bellcore D) Scrosati
A) 2005 B) 1978 C) 1991 D) 1998
A) They are pure dry electrolytes B) They are hybrid systems C) They are strictly liquid batteries D) They contain no liquid solvent
A) Gelled lithium-ion (GLi) B) Solid-state polymer unit C) Plastic lithium-ion cell (PLiON) D) Hybrid lithium cell |