A) Center Button B) Right Button C) Top Button D) Left Button
A) Numbers 1, 2, 3, and 4 B) USB and PC Ports C) Letters A, B, C, and D D) Numerals I, II, III, and IV
A) USB and PC Ports B) Letters A, B, C, and D C) Numbers 1, 2, 3, and 4 D) Numerals I, II, III, and IV
A) Remove the rechargable Li-Ion battery pack B) Press and hold the Left and Right buttons for 5 seconds C) Insert the Shut Down USB adapter into the USB port on the side of the EV3 D) Press the Back button until a Shut Down dialog box appears, then selecting the check with the Center button
A) Touch the screen with an included stylus pen B) Use the LEGO IR remote C) Use the direction buttons to navigate, Center button to select, and Back button to cancel or go back. D) Use the Sound sensor and the built-in voice commands
A) Brick Apps (third tab) > Port View > Select the motor or sensor that you just recently used to run that program B) File Navigation (second tab) > Select the Project > Select the Program C) Settings (fourth tab) > Brick Info > Recently Run, then use the center button to select D) Run Recent (first tab) > Select the program then press the center button
A) File Navigation (second tab) > Select the Project > Select the Program B) Settings (fourth tab) > Brick Info > Projects, then use the center button to select the programs C) Run Recent (first tab) > Select the program then press the center button D) Brick Apps (third tab) > Port View > Select the project that is linked to available sensors and motors
A) Using the Brick Apps (third menu) > Port View > Select the motor or sensor you want to view B) Adding a block to display the motor/sensor value when running a program C) Attaching a second screen adapter to the USB Port on the side of the EV3
A) On the EV3 Software B) In the Settings (fourth tab) menu C) On the back of the EV3 D) Behind the battery pack
A) In the Robot Educator section of the EV3 Education Programming Software B) In the EV3's firmware menus C) In the printed manual that came with the EV3 Set
A) Ethernet cable B) Power cable C) USB cable
A) Process data and make decisions B) Create a physical effect like turning a wheel C) Provide power to onboard electronics
A) Canvas, palette and communication pane B) Recent programs and settings C) User guide and Robot educator
A) Action blocks B) My blocks C) Flow blocks D) Advanced blocks
A) Advanced blocks B) Flow blocks C) My blocks D) Action blocks
A) positive power rotates motor clockwise/negative power rotates motor counter clockwise B) all of the listed attributes C) they can be on, off, on for seconds, on for rotations, on for degrees D) end with a coast or brake
A) Controls both motors together B) Controls both motors separately
A) What is the current firmware version B) How far the eV3 has traveled C) What sensors and motors are attached and their current readings D) When the program was last saved
A) Return the last input and output settings to the software B) Switch from program control to remote control C) Download and run the program
A) Press the New Program button on the home screen B) Click the + tab near the top of the screen C) Enter a name and press the Go >>> button |