A) Always cut away from yourself. B) Working in a dimly lit area. C) Carving with bare hands. D) Using the sharpest knife possible.
A) Basswood B) Rosewood C) Maple D) Oak
A) The direction of the wood fibers. B) The color of the wood. C) The smell of the wood. D) The weight of the wood.
A) V-tool B) Detail knife C) Skew chisel D) Gouge
A) To prevent the wood from splitting beyond the desired cut. B) To glue pieces together. C) To sharpen the knife. D) To stain the wood.
A) Vinegar B) Bleach C) Motor oil D) Wax
A) Palm grip B) Overhand grip C) Thumb push grip D) Hammer grip
A) Rusting the edge. B) Straightening the edge. C) Dulling the edge. D) Removing metal to sharpen the edge.
A) To hold the wood in place. B) To smooth the wood surface. C) To provide additional force to a chisel or gouge. D) To measure the wood.
A) Carving large pieces of wood. B) Removing small chips of wood to create a pattern. C) Painting chips of wood. D) Burning patterns into wood.
A) Chisel B) Gouge C) Welding torch D) Knife
A) Using a hammer and nail B) Using a blunt rock C) Using sandpaper D) Using a strop and honing compound
A) To provide a stable and safe surface for carving small pieces B) To measure the wood C) To hang your tools on D) To clamp large pieces of wood
A) Welding mask B) Steel toed boots C) Thumb guards, cut resistant gloves and eye protection D) Ear plugs
A) Iron carving B) Sand carving C) Relief carving D) Plastic carving
A) The weight of the wood B) The color of the wood C) The width of the cut made by a saw or knife D) The length of the wood
A) To cut straight lines B) To drill holes C) To shape and smooth curved surfaces D) To glue pieces together
A) Building bridges B) Creating decorative objects C) Farming crops D) Mining for minerals
A) To dull the blade B) To sharpen the blade C) To add color to the blade D) To prevent rust
A) Thrown haphazardly into a drawer B) In a bucket of water C) Separately and protected to avoid damage D) Buried in the ground
A) Painting wood with watercolors. B) Carving large pieces of wood with a chainsaw. C) Carving small pieces of wood with a knife. D) Burning designs into wood.
A) Balsa B) Pine C) Cedar D) Cherry
A) Cutting wood into small pieces. B) Polishing wood to a high shine. C) Gluing wood together. D) Shaping wood to a rough form, prior to sanding.
A) 45 degrees B) 90 degrees C) 15-20 degrees D) Parallel to the sharpening stone
A) Drilling holes. B) Attaching pieces of wood together. C) Creating clean edges and corners. D) Roughing out large areas of wood.
A) Tight knot B) Loose knot C) Burl D) Pin knot
A) The sharpest part of the blade. B) The part of the blade that extends into the handle. C) The decorative markings on the blade. D) The wooden handle itself.
A) Soaking the wood in water. B) Adding spices to the wood to improve its smell. C) Drying the wood to reduce moisture content. D) Painting the wood a particular color.
A) Coping saw B) Hand saw C) Rip saw D) Crosscut saw
A) To make the wood smell better. B) To see the details clearly and prevent mistakes. C) To keep the wood warm. D) To attract insects. |