- 1. 1. --------- is the process of transferring a design or pattern to a workpiece, as a first step in the manufacturing process.
A) Marking out
B) Surface plate
C) Metal work
D) Wood work
- 2. 2. Another name for 'height gauge' is ---------
A) Scribing block
B) Height level
C) Scripture blade
D) Height meter
- 3. 3. The material in metalwork used to mark lines on the workpiece before machining is called --------
A) Scriber
B) Ball pein hammer
C) Angular
D) Plating
- 4. 4. One of the following is not a marking out tool.
A) Protractor
B) Surface gauge
C) Punch
D) Steel rule
- 5. 5. --------- is used to make holes in materials.
A) Scriber
B) Divider
C) Calipers
D) Punch
- 6. 6. An equilateral triangle has -----
A) Two equal angles
B) Three equal sides
C) Two equal sides
D) No equal sides
- 7. 7. How many sides has a heptagon?
A) 8
B) 10
C) 6
D) 7
- 8. 8. All of the following are examples of equilaterals except a -------------
A) Triangle
B) Parallelogram
C) Square
D) Rectangle
- 9. 9. One of the following is a dye used in metalwork to aid marking out rough parts for further machining.
A) Iodine
B) Gemsa stain
C) Layout stain
D) Gental violet
- 10. 10. --------- is a triangle that has two of its angles equal, usually the base angles .
A) Equilateral
B) Isosceles
C) scalene
D) Right angle
- 11. 11. ----------- is a triangle that has one of the angles as 90°
A) A right angle
B) An obtuse angle
C) Acute angle
D) A righ-angled triangle
- 12. 12. -----------is used to measure the outside diameter of metal in increments of one thousandth of an inch.
A) Micrometer
B) Screw driver
C) Dial caliper
D) Divider
- 13. 13. One of the following is not a measuring tool.
A) Odd-leg caliper
B) Inside caliper
C) Divider
D) Compass
- 14. 14. The following are driving tools except -------
A) Hardness tester
B) Hammer
C) Tinman's mallet
D) Ball -peen
- 15. 15. ------ is used to test for the accuracy of the work.
A) Pliers
B) Metric rule
C) Bossing mallet
D) Try square
- 16. 16. One of the following is used to shape metals.
A) Hammer
B) Tinman's mallet
C) Punch
D) Ball peen
- 17. 17. -------is an instrument designed to drive in and out screws.
A) Wrenches
B) Tinman's mallet
C) Screwdriver
D) Calipers
- 18. 18. The instrument used in measuring the diameter or the inner part of an object is called ----------
A) Inside caliper
B) Inside capler
C) Inside measurer
D) Inside diameter
- 19. 19. One of the following is not a type of screwdriver.
A) Star screwdriver
B) Allen screwdriver
C) Drill bradawl screwdriver
D) Offset screwdriver
- 20. 20. All are examples of pliers except ----------
A) Long nose plier
B) Cutting plier
C) Bench hook plier
D) Gripping plier
|