- 1. 1. --------- is the process of transferring a design or pattern to a workpiece, as a first step in the manufacturing process.
A) Surface plate B) Wood work C) Marking out D) Metal work
- 2. 2. Another name for 'height gauge' is ---------
A) Height level B) Scripture blade C) Height meter D) Scribing block
- 3. 3. The material in metalwork used to mark lines on the workpiece before machining is called --------
A) Ball pein hammer B) Angular C) Plating D) Scriber
- 4. 4. One of the following is not a marking out tool.
A) Punch B) Surface gauge C) Protractor D) Steel rule
- 5. 5. --------- is used to make holes in materials.
A) Divider B) Punch C) Calipers D) Scriber
- 6. 6. An equilateral triangle has -----
A) Three equal sides B) Two equal sides C) Two equal angles D) No equal sides
- 7. 7. How many sides has a heptagon?
A) 8 B) 10 C) 7 D) 6
- 8. 8. All of the following are examples of equilaterals except a -------------
A) Triangle B) Rectangle C) Parallelogram D) Square
- 9. 9. One of the following is a dye used in metalwork to aid marking out rough parts for further machining.
A) Gental violet B) Iodine C) Layout stain D) Gemsa stain
- 10. 10. --------- is a triangle that has two of its angles equal, usually the base angles .
A) Isosceles B) scalene C) Equilateral D) Right angle
- 11. 11. ----------- is a triangle that has one of the angles as 90°
A) An obtuse angle B) Acute angle C) A right angle D) A righ-angled triangle
- 12. 12. -----------is used to measure the outside diameter of metal in increments of one thousandth of an inch.
A) Dial caliper B) Micrometer C) Divider D) Screw driver
- 13. 13. One of the following is not a measuring tool.
A) Inside caliper B) Compass C) Divider D) Odd-leg caliper
- 14. 14. The following are driving tools except -------
A) Hardness tester B) Ball -peen C) Tinman's mallet D) Hammer
- 15. 15. ------ is used to test for the accuracy of the work.
A) Metric rule B) Try square C) Bossing mallet D) Pliers
- 16. 16. One of the following is used to shape metals.
A) Tinman's mallet B) Hammer C) Punch D) Ball peen
- 17. 17. -------is an instrument designed to drive in and out screws.
A) Calipers B) Wrenches C) Tinman's mallet D) Screwdriver
- 18. 18. The instrument used in measuring the diameter or the inner part of an object is called ----------
A) Inside diameter B) Inside caliper C) Inside measurer D) Inside capler
- 19. 19. One of the following is not a type of screwdriver.
A) Allen screwdriver B) Offset screwdriver C) Drill bradawl screwdriver D) Star screwdriver
- 20. 20. All are examples of pliers except ----------
A) Cutting plier B) Bench hook plier C) Long nose plier D) Gripping plier
|