AIC 2nd Term JS2 B. TECH EXAMINATION
  • 1. 1. Which of the following is not a tool used in site preparation and building construction?
A) Shovel
B) Screwdriver
C) Wheelbarrow
D) Hammer
  • 2. 2. What is the purpose of setting out in building construction?
A) To mark the boundaries of the building
B) To mix concrete for the foundation
C) To create a blueprint of the building
D) To level the ground for construction
  • 3. Which of the following machines is commonly used in site preparation?
A) Microwave
B) Blender
C) Excavator
D) Toaster
  • 4. What is the function of a wheelbarrow on a construction site?
A) To paint walls
B) To transport materials
C) To measure distances
D) To cut wood
  • 5. Which tool is used for digging and moving soil on a construction site?
A) Shovel
B) Tape measure
C) Saw
D) Hammer
  • 6. What is the purpose of a level on a construction site?
A) To ensure surfaces are flat and even
B) To measure weight
C) To cut materials
D) To measure angles
  • 7. Which of the following is NOT a machine used in site preparation?
A) Bulldozer
B) Washing machine
C) Crane
D) Concrete mixer
  • 8. What is the function of a tape measure on a construction site?
A) To mix concrete
B) To cut materials
C) To measure distances
D) To transport materials
  • 9. What is the process of cutting down trees for wood known as?
A) Mining
B) Hunting
C) Fishing
D) Harvesting
  • 10. Which of the following is a common tool used in woodworking?
A) Hammer
B) Pliers
C) Wrench
D) Screwdriver
  • 11. Felling down of trees is done with the aid of _______
A) Chainsaw
B) G clamp
C) Hammer
D) Screwdriver
  • 12. _______ is the process of drying wood by leaving it in the open air
A) Wood preservation
B) Wood harvesting
C) Wood seasoning
D) Wood conversion
  • 13. ________ is the process of turning raw wood into usable products like timber and planks
A) Wood conversion
B) Wood harvesting
C) Wood felling
D) Wood seasoning
  • 14. The process of applying chemical to wood to prevent insects and fungi attack is called _______
A) Wood conversion
B) Wood seasoning
C) Wood preservation
D) Wood felling
  • 15. The following are types windows except ______
A) Casement window
B) Wooden window
C) Louvre window
D) Sliding sash window
  • 16. _______ refers to the various parts that make up a building
A) House
B) Window
C) Door
D) Building components
  • 17. ________ is where electricity is produced
A) Step up transformer
B) Substation
C) Transmission line
D) Generating station
  • 18. _________ consumers uses electricity for irrigation
A) Agricultural
B) Commercial
C) Domestic
D) Industrial
  • 19. The following are mechanical equipments used in site preparation except
A) Bulldozer
B) Tractor
C) Shovel
D) Grader
  • 20. _________ support transmission lines
A) Transmission towers
B) Step-up transformer
C) Substation
D) Transmission lines
  • 21. ________ carries electricity over long distance
A) Generating system
B) Transmission tower
C) Transmission lines
D) Substation
  • 22. The destinations at which power is received is referred to as ________
A) Stop station
B) Receiving end
C) End station
D) Start station
  • 23. GPS means ________
A) Global Positioning System
B) Global point station
C) Glowing Positioning System
D) Global Positioning Station
  • 24. _________ is a solid barrier that close and opens the entrance in a building or a room
A) Door
B) Floor
C) Roof
D) Window
  • 25. Creosote and chlorinated phenol are examples of ______
A) Wood conversion
B) Wood harvesting
C) Wood preservatives
D) Wood seasoning
  • 26. Examples of interior doors include the following except ______
A) Louvre doors
B) Sliding doors
C) French doors
D) Panel doors
  • 27. The following are examples of exterior doors except _______
A) French door
B) Revolving door
C) Folding door
D) Sliding door
  • 28. Exterior doors are usually made of _____
A) Copper
B) Hardwood and metal
C) Aluminum
D) Softwood
  • 29. The process of creating new ideas methods or products is _________
A) Innovation
B) Software
C) Technology
D) Production
  • 30. ______ is the knowledge of programming language tools and system
A) Technical skill
B) Creativity
C) Communication
D) Problem solving
Students who took this test also took :

Created with That Quiz — where test making and test taking are made easy for math and other subject areas.