- 1. 1. --------- is the process of transferring a design or pattern to a workpiece, as a first step in the manufacturing process.
A) Marking out
B) Metal work
C) Surface plate
D) Wood work
- 2. 2. Another name for 'height gauge' is ---------
A) Height level
B) Height meter
C) Scribing block
D) Scripture blade
- 3. 3. The material in metalwork used to mark lines on the workpiece before machining is called --------
A) Plating
B) Ball pein hammer
C) Scriber
D) Angular
- 4. 4. One of the following is not a marking out tool.
A) Surface gauge
B) Steel rule
C) Punch
D) Protractor
- 5. 5. --------- is used to make holes in materials.
A) Calipers
B) Scriber
C) Punch
D) Divider
- 6. 6. An equilateral triangle has -----
A) No equal sides
B) Three equal sides
C) Two equal angles
D) Two equal sides
- 7. 7. How many sides has a heptagon?
A) 10
B) 7
C) 6
D) 8
- 8. 8. All of the following are examples of equilaterals except a -------------
A) Rectangle
B) Square
C) Triangle
D) Parallelogram
- 9. 9. One of the following is a dye used in metalwork to aid marking out rough parts for further machining.
A) Layout stain
B) Gemsa stain
C) Gental violet
D) Iodine
- 10. 10. --------- is a triangle that has two of its angles equal, usually the base angles .
A) scalene
B) Right angle
C) Isosceles
D) Equilateral
- 11. 11. ----------- is a triangle that has one of the angles as 90°
A) Acute angle
B) A righ-angled triangle
C) An obtuse angle
D) A right angle
- 12. 12. -----------is used to measure the outside diameter of metal in increments of one thousandth of an inch.
A) Dial caliper
B) Micrometer
C) Divider
D) Screw driver
- 13. 13. One of the following is not a measuring tool.
A) Divider
B) Odd-leg caliper
C) Compass
D) Inside caliper
- 14. 14. The following are driving tools except -------
A) Tinman's mallet
B) Hammer
C) Hardness tester
D) Ball -peen
- 15. 15. ------ is used to test for the accuracy of the work.
A) Pliers
B) Metric rule
C) Try square
D) Bossing mallet
- 16. 16. One of the following is used to shape metals.
A) Hammer
B) Ball peen
C) Punch
D) Tinman's mallet
- 17. 17. -------is an instrument designed to drive in and out screws.
A) Wrenches
B) Tinman's mallet
C) Calipers
D) Screwdriver
- 18. 18. The instrument used in measuring the diameter or the inner part of an object is called ----------
A) Inside measurer
B) Inside capler
C) Inside caliper
D) Inside diameter
- 19. 19. One of the following is not a type of screwdriver.
A) Drill bradawl screwdriver
B) Offset screwdriver
C) Allen screwdriver
D) Star screwdriver
- 20. 20. All are examples of pliers except ----------
A) Bench hook plier
B) Long nose plier
C) Gripping plier
D) Cutting plier
|